Dodge Charger Custom Wrap, AI Render

Custom Wrap on a Dodge Charger: What Changes

The Charger is one of the most wrapped cars in America, and the searches show what people want from it. The biggest single term is a Charger Hellcat wrap, then a matte black Charger, then plain Charger wrap ideas. Those three cover almost every wrapped Charger you will see. The first is Hellcat styling on any Charger: the cat-head logo, a livery, or graphics in the Hellcat's own spirit. RedlineDesign.tv sells a blank Hellcat livery at $600 and Hellcat decal kits in 3M 2080 film at $275–$300, SauceN Design sells another at $325, and a Vancouver shop, Twiisted Wrap, shows custom Hellcat logos on a Charger SRT. The second is the flat-black look. Most matte black Chargers are wrapped rather than painted, because film is the cheap and reversible way to get a flat finish, and Ravoony sells cast matte black film for about $390. The third is full printed designs, which are now sold cut to the Charger's shape. Gato Wrapz claw-mark, camouflage and gradient wraps sell through Raxtify for $829, and a pre-cut printed full-wrap kit for the 2015–2019 Hellcat has been listed at $2,500. Between those sit the partials Charger owners do most. Rvinyl notes that carbon fibre bonnet and roof wraps are especially common on Scat Pack and Hellcat builds. One owner on the SRT Hellcat Forum wrapped his own car with a satin black bonnet and roof over a grey called Thundercloud. This page covers the 2011–2023 Charger; the 2024-on Charger Daytona is a different body, so check that any kit says Daytona before you buy for one.

Budgeting a Charger Custom Wrap Build

The Charger is a full-size sedan, about 5,040 mm long, so it takes more film than a coupe. Film brands sell 5 ft by 59 ft rolls labelled as Charger size, and installers usually order a few feet more to cover bumpers and mistakes. Cost guides put a Charger wrap at $2,000–$6,000 depending on film, coverage and labour. Our estimate for a full colour change in 3M or Avery cast film at a reputable shop is about $3,500–$5,000, and the lower end of the guide range means cheaper film or a less careful install. The widebody cars cost more: the 2020-on Hellcat and Scat Pack Widebody add 3.5 inches of bolt-on flares, and every flare is extra edges to wrap and tuck. Printed designs add their own cost on top of the install. A Gato Wrapz printed kit is $829 in film alone, and a printed full kit for a Hellcat has been listed at $2,500, so a printed Charger usually lands above a single-colour wrap once it is fitted. Partials are where Charger owners save. A Hellcat decal kit is $275–$325 in film, and a bonnet or roof in gloss black, satin black or carbon is typically a few hundred dollars fitted. The Charger's big flat bonnet, boot and roof take the most sun, so they are also the first places a cheap film fades. If a quote for a full Charger is far under $2,500, ask which film it is. Calendered film on a car this size usually lifts at the bumper edges within a year or two.

Rendering a Custom Wrap on Your Charger: Three Steps

1. 1
   Upload a photo of your Charger. Almost any clear angle works, with side profile the strongest for colour and wrap changes. JPG or PNG, up to 10MB.
2. 2
   Select Custom Wrap as your style. The model reads your Charger's panels and stance and applies the style to your actual car, never a template.
3. 3
   Download your render. It takes roughly 30 seconds. The free tier watermarks the file; Pro ($14/mo or $69/yr) unlocks 250 clean HD renders monthly, ideal for an installer.