Skip to content
TUNED RIDES
Try free

Audi · Offroad · 2014-2018

Audi RS7 (C7) Offroad, AI Render

Render your car lifted — raised suspension, all-terrain tires, rugged off-road stance. Preview it on your own RS7 before you spend a thing.

Render your RS7 free →
Offroad AI render example — upload your RS7 to see yoursOffroad example

Offroad on the Audi RS7 (C7), What to Expect

An offroad build on the Audi RS7 (C7) is about capability and stance. Raise the ride height with a 3–6 inch suspension lift, fit chunky all-terrain or mud-terrain tires on rugged wheels, and the RS7 goes from street-spec to trail-ready, taller, wider-tracked, and unmistakably built to leave the pavement. The look is purposeful: more wheel gap, more sidewall, and the gear to back it up.

Budgeting a RS7 Offroad Build

Three purchases define an offroad RS7 build. The lift: $300–$800 for a leveling kit at the budget end, $1,500–$4,000 installed for quality long-travel or coilover setups from Fox, King, BDS, or Rough Country. The rolling stock: $1,500–$3,000 for a full set of all-terrains (BFGoodrich KO2, Falken Wildpeak) on off-road wheels from Method or Fuel. And the trail hardware — skid plates, a light bar, a roof rack — that finishes the job. All-in, expect $3,000–$10,000.

Preview your RS7 before the build starts

Lift kits and tyres are easy to buy and expensive to re-buy — which is what happens when the proportions land wrong on your specific RS7. Render the lifted stance on your own truck first with TunedRides: right lift, right tyre, right offset, confirmed visually before the parts order goes in.

Upload your RS7 photo, free →

How to Render Your RS7 With a Offroad

  1. 1
    Upload a photo of your RS7. One good frame is enough; a side or three-quarter view suits stance and aero changes. JPG or PNG, up to 10MB.
  2. 2
    Select Offroad as your style. Your RS7's own shape guides the render, so the result is your specific car reworked rather than a generic model.
  3. 3
    Download your render. About half a minute later it's ready. Free renders carry a watermark; Pro ($14/mo or $99/yr) delivers 250 clean HD renders a month, great to hand an installer.

RS7 Offroad: Common Questions

How much lift does a RS7 need?

The common range is 3–6 inches: enough to clear meaningfully larger tires and add real approach and departure angle, without pushing the geometry and driveline angles into problem territory that bigger lifts bring. The right number depends on the tire size you're targeting — pick the tire first, then the lift that clears it, and render the combination to check the proportions.

All-terrain or mud-terrain tires for a lifted RS7?

All-terrains (BFGoodrich KO2, Falken Wildpeak) are the right answer for most builds — genuinely capable off-road while staying civil, quiet, and predictable on the daily commute. Mud-terrains bite harder in mud and rock but trade road noise, wet grip, and wear to get there. Match the tire to how the RS7 actually gets used.

What tires should a lifted RS7 run?

All-terrains — BFGoodrich KO2, Falken Wildpeak — are the default: aggressive enough for trails, civil enough for the daily commute. Mud-terrains trade road manners and noise for maximum off-road bite, and make sense only if the RS7 genuinely sees mud and rock. A full set on off-road wheels from Method or Fuel runs $1,500–$3,000.

How much does it cost to lift a RS7?

A budget leveling kit runs $300–$800, while quality long-travel or coilover lifts from Fox, King, BDS, or Rough Country run $1,500–$4,000 installed. Add $1,500–$3,000 for all-terrain tires (BFGoodrich KO2, Falken Wildpeak) on off-road wheels from Method or Fuel, plus whatever trail gear the build calls for. A well-sorted offroad RS7 totals $3,000–$10,000.

Can I see my RS7 lifted before buying anything?

Yes. Upload a photo of your RS7 to TunedRides and the AI renders it lifted on all-terrain tires in about 30 seconds. Lift height, tire size, and wheel choice all change the proportions — seeing the combination on your actual truck first is exactly what the tool is for. Free to try, no account required.

Going to your installer?

Installer-ready HD renders, no watermark, with Pro

A Audi RS7 (C7) offroad build runs $3,000–$10,000. Pro delivers a 4K render clean enough to hand your builder as the brief. Just $8.25/mo on the annual plan.

See what Pro unlocksOr try free first

Audi RS7 (C7): other render styles

Widebody KitRS7 Widebody Kit →StanceRS7 Stance →SlammedRS7 Slammed →JDM StyleRS7 JDM Style →Drift BuildRS7 Drift Build →Custom WrapRS7 Custom Wrap →Color ChangeRS7 Color Change →

More Offroad builds to explore

JeepGrand Cherokee Trackhawk →Chrysler300 →DodgeDurango →ChevroletCorvette C8 →DodgeCharger →ChevroletCorvette C4 →
← All Audi RS7 (C7) renders|All Offroad renders →