Skip to content
TUNED RIDES
Try free

Toyota · Widebody Kit · 1989-1999

Toyota MR2 (SW20) Widebody Kit, AI Render

Render your car with a widebody — fender flares, wider track, aggressive rear haunches. Visualise it on your actual MR2 before the build starts.

Render your MR2 free →
Widebody Kit AI render example — upload your MR2 to see yoursWidebody Kit example

Widebody Kit on a Toyota MR2 (SW20): What Changes

Fit a widebody kit and the Toyota MR2 (SW20) stops reading as the car it left the factory as. The formula is consistent across the culture: fender flares adding roughly 30–80mm per side, wheel arches filled by significantly wider wheels, and a track that visually plants the car on the road. The standard a good build chases is simple — it should look like a factory special, not an aftermarket afterthought, from every angle.

Budgeting a MR2 Widebody Kit Build

Budget a well-executed MR2 widebody build at $6,000–$20,000+ on enthusiast platforms with premium kit options all-in, and work backwards from there. The kit itself is only part of that: entry-level FRP parts start around $1,500–$3,000, established names like Liberty Walk, Rocket Bunny, and Pandem sit in the $3,000–$8,000 band, and carbon fibre or custom fabrication can reach $12,000–$20,000 before anything is fitted. The remaining $2,500–$5,000 goes on the work that makes or breaks the result — installation, body prep, gap filling, and paint.

Render your MR2 before you buy anything

The same widebody kit reads very differently depending on the trim, colour, and wheels it lands on — what looks aggressive on a stock silver MR2 press shot can look entirely different on your car. Rendering the conversion on your actual MR2 first is how Toyota owners on TunedRides settle the question before the first part is ordered.

Upload your MR2 photo, free →

See Your MR2 With a Widebody Kit in 30 Seconds

  1. 1
    Upload a photo of your MR2. Upload any decent photo; a three-quarter or side view suits bodywork modifications like widebody kits best. JPG or PNG, up to 10MB.
  2. 2
    Select Widebody Kit as your style. The AI traces your MR2's bodywork and proportions, then renders the change onto your real car, not a stand-in.
  3. 3
    Download your render. Roughly 30 seconds to render. The free tier watermarks output; Pro ($14/mo or $69/yr) removes it and adds 250 HD renders a month for builders and shops.

MR2 Widebody Kit Questions, Answered

Do I need to cut my MR2's fenders for a widebody kit?

Most widebody kits require fender modification, either cutting the inner lip, rolling the outer edge, or riveting flares over the existing bodywork. Some bolt-on kits for specific platforms minimize metal work, but proper fitment almost always requires shop time. Confirm the installation requirements with your installer before purchasing any kit.

Bolt-on or welded flares for a MR2 widebody?

Bolt-on and rivet-on kits preserve more of the original bodywork and read deliberately aggressive — the exposed-hardware look is part of the Rocket Bunny/Pandem aesthetic. Welded and moulded conversions blend into the body for a factory-wide look but are fully permanent and cost more in bodywork. Which suits the MR2 depends on the look you're chasing — render both directions first.

Is a widebody kit worth it on a MR2?

If you're building a show car, a dedicated track car, or a car you intend to keep long-term, a widebody kit on the MR2 is one of the most dramatic transformations available. It narrows your resale audience and requires a significant investment in parts, labor, and paint. Use TunedRides to confirm the aesthetic first. Seeing the result before spending $6,000–$20,000+ on enthusiast platforms with premium kit options is exactly why the tool exists.

Can I keep my stock wheels after a widebody conversion on a MR2?

Technically yes, visually no. The extra 30–80mm of arch per side exists to cover a wider wheel and tire — on stock wheels the MR2 would sit visibly hollow inside the new flares, which reads as unfinished. Budget for wider wheels with recalculated offset as part of the build, and preview the full combination on a render before ordering either.

How much does a widebody kit cost for a MR2?

A widebody kit for a Toyota MR2 (SW20) typically costs $6,000–$20,000+ on enthusiast platforms with premium kit options. The kit parts alone run $1,500–$8,000 depending on brand and material (FRP vs carbon fiber). Professional installation, body prep, gap filling, and paint typically add $2,500–$5,000. Budget for the full installed cost, not just the kit price.

Going to your installer?

Installer-ready HD renders, no watermark, with Pro

A Toyota MR2 (SW20) widebody build runs $6,000–$20,000+ on enthusiast platforms with premium kit options. With Pro you get a 4K render to take to the shop so they nail the look first time. $5.75/mo billed annually.

See what Pro unlocksOr try free first

Other Toyota MR2 (SW20) builds to try

StanceMR2 Stance →SlammedMR2 Slammed →JDM StyleMR2 JDM Style →Drift BuildMR2 Drift Build →Custom WrapMR2 Custom Wrap →Color ChangeMR2 Color Change →OffroadMR2 Offroad →

Other cars in Widebody Kit spec

JeepGrand Cherokee Trackhawk →Chrysler300 →DodgeDurango →ChevroletCorvette C8 →DodgeCharger →ChevroletCorvette C4 →
← All Toyota MR2 (SW20) renders|All Widebody Kit renders →