Skip to content
TUNED RIDES
Try free

Nissan · Widebody Kit · 1983-1988

Nissan Silvia S12 Widebody Kit, AI Render

Render your car with a widebody — fender flares, wider track, aggressive rear haunches. See exactly how it looks on your Silvia S12 before buying parts.

Render your Silvia S12 free →
Widebody Kit AI render example — upload your Silvia S12 to see yoursWidebody Kit example

The Nissan Silvia S12 Widebody Kit, Explained

A widebody kit on the Nissan Silvia S12 is one of the most transformative modifications you can make. The conversion adds extended fender flares, typically 30–80mm wider per side, allowing significantly wider wheels while creating the aggressive visual signature that defines widebody culture. On the Silvia S12, this means a fuller wheel arch, a planted stance, and a car that looks completely different from any angle. The goal is a car that looks custom from the factory, not like an afterthought.

Real Build Cost for a Silvia S12 Widebody Kit

The line item most Silvia S12 widebody budgets miss is not the kit — it is the $2,500–$5,000 of installation, body prep, gap filling, and paint that any kit needs to look right. On the parts side the market is tiered: FRP kits open at $1,500–$3,000 for the body pieces alone, mid-tier kits from makers like Liberty Walk, Rocket Bunny, or Pandem run $3,000–$8,000, and carbon fibre or high-end fabrication climbs to $12,000–$20,000. Taken together, a properly finished Silvia S12 widebody lands in the $6,000–$20,000+ on enthusiast platforms with premium kit options range.

See it on your Silvia S12 before ordering parts

The same widebody kit reads very differently depending on the trim, colour, and wheels it lands on — what looks aggressive on a stock silver Silvia S12 press shot can look entirely different on your car. Rendering the conversion on your actual Silvia S12 first is how Nissan owners on TunedRides settle the question before the first part is ordered.

Upload your Silvia S12 photo, free →

Rendering a Widebody Kit on Your Silvia S12: Three Steps

  1. 1
    Upload a photo of your Silvia S12. One good photo does it — profile shots read bodywork modifications like widebody kits most accurately. JPG or PNG, up to 10MB.
  2. 2
    Select Widebody Kit as your style. The AI identifies how your Silvia S12 is shaped and transforms that, so the render reflects your real car, not an approximation.
  3. 3
    Download your render. Roughly 30 seconds to render. The free tier watermarks output; Pro ($14/mo or $69/yr) removes it and adds 250 HD renders a month for builders and shops.

Silvia S12 Widebody Kit, FAQ

Bolt-on or welded flares for a Silvia S12 widebody?

Bolt-on and rivet-on kits preserve more of the original bodywork and read deliberately aggressive — the exposed-hardware look is part of the Rocket Bunny/Pandem aesthetic. Welded and moulded conversions blend into the body for a factory-wide look but are fully permanent and cost more in bodywork. Which suits the Silvia S12 depends on the look you're chasing — render both directions first.

FRP or carbon fiber for a Silvia S12 widebody kit?

FRP (fiberglass-reinforced plastic) is the accessible route — entry kits start around $1,500–$3,000, and the material takes paint well but needs careful prep and fitting. Carbon fiber kits and high-end fabrication run $12,000–$20,000 before installation, trading cost for weight savings and finish. For most street builds on a Silvia S12, a well-fitted FRP kit painted properly is the sensible choice; carbon belongs on builds where budget follows ambition.

Can I keep my stock wheels after a widebody conversion on a Silvia S12?

Technically yes, visually no. The extra 30–80mm of arch per side exists to cover a wider wheel and tire — on stock wheels the Silvia S12 would sit visibly hollow inside the new flares, which reads as unfinished. Budget for wider wheels with recalculated offset as part of the build, and preview the full combination on a render before ordering either.

Is a widebody kit worth it on a Silvia S12?

If you're building a show car, a dedicated track car, or a car you intend to keep long-term, a widebody kit on the Silvia S12 is one of the most dramatic transformations available. It narrows your resale audience and requires a significant investment in parts, labor, and paint. Use TunedRides to confirm the aesthetic first. Seeing the result before spending $6,000–$20,000+ on enthusiast platforms with premium kit options is exactly why the tool exists.

What widebody kits are available for the Silvia S12?

The Silvia S12 has aftermarket widebody options ranging from FRP bolt-on flares ($800–$2,000) to premium kits from Liberty Walk, Rocket Bunny, or Pandem ($3,000–$8,000). The availability and quality of kits depends on the platform's popularity in the tuning community. Use our render tool to see the widebody aesthetic on your car before researching specific kit options.

Going to your installer?

HD, watermark-free renders your installer can build from

A Nissan Silvia S12 widebody build runs $6,000–$20,000+ on enthusiast platforms with premium kit options. Step up to Pro for a 4K, watermark-free render that doubles as your build brief. $5.75/mo on annual.

See what Pro unlocksOr try free first

More Nissan Silvia S12 renders

StanceSilvia S12 Stance →SlammedSilvia S12 Slammed →JDM StyleSilvia S12 JDM Style →Drift BuildSilvia S12 Drift Build →Custom WrapSilvia S12 Custom Wrap →Color ChangeSilvia S12 Color Change →OffroadSilvia S12 Offroad →

More Widebody Kit builds to explore

JeepGrand Cherokee Trackhawk →Chrysler300 →DodgeDurango →ChevroletCorvette C8 →DodgeCharger →ChevroletCorvette C4 →
← All Nissan Silvia S12 renders|All Widebody Kit renders →