Skip to content
TUNED RIDES
Try free

Mazda · Widebody Kit · 1985-1992

Mazda RX-7 (FC) Widebody Kit, AI Render

Render your car with a widebody — fender flares, wider track, aggressive rear haunches. Preview it on your actual RX-7 (FC) first — then spend.

Render your RX-7 (FC) free →
Widebody Kit AI render example — upload your RX-7 (FC) to see yoursWidebody Kit example

Widebody Kit on the Mazda RX-7 (FC), What to Expect

Fit a widebody kit and the Mazda RX-7 (FC) stops reading as the car it left the factory as. The formula is consistent across the culture: fender flares adding roughly 30–80mm per side, wheel arches filled by significantly wider wheels, and a track that visually plants the car on the road. The standard a good build chases is simple — it should look like a factory special, not an aftermarket afterthought, from every angle.

RX-7 (FC) Widebody Kit: The Cost Breakdown

Budget a well-executed RX-7 (FC) widebody build at $6,000–$20,000+ on enthusiast platforms with premium kit options all-in, and work backwards from there. The kit itself is only part of that: entry-level FRP parts start around $1,500–$3,000, established names like Liberty Walk, Rocket Bunny, and Pandem sit in the $3,000–$8,000 band, and carbon fibre or custom fabrication can reach $12,000–$20,000 before anything is fitted. The remaining $2,500–$5,000 goes on the work that makes or breaks the result — installation, body prep, gap filling, and paint.

Try it on your RX-7 (FC) before you spend

Before you commit money to a RX-7 (FC) widebody kit, seeing the visual result on your actual car matters. A kit that looks aggressive on a render of a stock silver RX-7 (FC) looks different on your specific trim, color, and wheel combination. That's why it is worth rendering the transformation on your own RX-7 (FC) before the first part order is placed.

Upload your RX-7 (FC) photo, free →

Rendering a Widebody Kit on Your RX-7 (FC): Three Steps

  1. 1
    Upload a photo of your RX-7 (FC). Any sharp, well-lit shot does it — side-on favours bodywork modifications like widebody kits. JPG or PNG, up to 10MB.
  2. 2
    Select Widebody Kit as your style. Our AI reads your RX-7 (FC)'s body lines and proportions, then applies the transformation accurately. Not a generic edit, a render that respects your specific car.
  3. 3
    Download your render. About half a minute later it's ready. Free renders carry a watermark; Pro ($14/mo or $69/yr) delivers 250 clean HD renders a month, great to hand an installer.

RX-7 (FC) Widebody Kit, FAQ

How much does a widebody kit cost for a RX-7 (FC)?

A widebody kit for a Mazda RX-7 (FC) typically costs $6,000–$20,000+ on enthusiast platforms with premium kit options. The kit parts alone run $1,500–$8,000 depending on brand and material (FRP vs carbon fiber). Professional installation, body prep, gap filling, and paint typically add $2,500–$5,000. Budget for the full installed cost, not just the kit price.

FRP or carbon fiber for a RX-7 (FC) widebody kit?

FRP (fiberglass-reinforced plastic) is the accessible route — entry kits start around $1,500–$3,000, and the material takes paint well but needs careful prep and fitting. Carbon fiber kits and high-end fabrication run $12,000–$20,000 before installation, trading cost for weight savings and finish. For most street builds on a RX-7 (FC), a well-fitted FRP kit painted properly is the sensible choice; carbon belongs on builds where budget follows ambition.

Is a widebody kit worth it on a RX-7 (FC)?

If you're building a show car, a dedicated track car, or a car you intend to keep long-term, a widebody kit on the RX-7 (FC) is one of the most dramatic transformations available. It narrows your resale audience and requires a significant investment in parts, labor, and paint. Use TunedRides to confirm the aesthetic first. Seeing the result before spending $6,000–$20,000+ on enthusiast platforms with premium kit options is exactly why the tool exists.

Can I keep my stock wheels after a widebody conversion on a RX-7 (FC)?

Technically yes, visually no. The extra 30–80mm of arch per side exists to cover a wider wheel and tire — on stock wheels the RX-7 (FC) would sit visibly hollow inside the new flares, which reads as unfinished. Budget for wider wheels with recalculated offset as part of the build, and preview the full combination on a render before ordering either.

Can I see what a widebody kit looks like on my RX-7 (FC) before buying?

Yes. That's exactly what TunedRides is built for. Upload a photo of your RX-7 (FC) and select widebody kit as your style. You get an AI render of your car with extended fenders, wider track, and full aero in about 30 seconds. Free to try, no account required.

Handing it to your shop?

Installer-ready HD renders, no watermark, with Pro

A Mazda RX-7 (FC) widebody build runs $6,000–$20,000+ on enthusiast platforms with premium kit options. Pro upgrades it to a 4K render clean enough to give your installer as-is. About $5.75/mo billed yearly.

See what Pro unlocksOr try free first

Mazda RX-7 (FC): other render styles

StanceRX-7 (FC) Stance →SlammedRX-7 (FC) Slammed →JDM StyleRX-7 (FC) JDM Style →Drift BuildRX-7 (FC) Drift Build →Custom WrapRX-7 (FC) Custom Wrap →Color ChangeRX-7 (FC) Color Change →OffroadRX-7 (FC) Offroad →

Popular Widebody Kit builds

JeepGrand Cherokee Trackhawk →Chrysler300 →DodgeDurango →ChevroletCorvette C8 →DodgeCharger →ChevroletCorvette C4 →
← All Mazda RX-7 (FC) renders|All Widebody Kit renders →