Skip to content
TUNED RIDES
Try free

Ford · Widebody Kit

Ford Bronco Widebody Kit, AI Render

Render your car with a widebody — fender flares, wider track, aggressive rear haunches. Visualise it on your actual Bronco before the build starts.

Render your Bronco free →
Ford Bronco Widebody Kit AI render exampleAI render

Widebody Kit on the Ford Bronco, What to Expect

Fit a widebody kit and the Ford Bronco stops reading as the car it left the factory as. The formula is consistent across the culture: fender flares adding roughly 30–80mm per side, wheel arches filled by significantly wider wheels, and a track that visually plants the car on the road. Modern overland icon. Wrap + roof rack + light bar + fender flares. The standard a good build chases is simple — it should look like a factory special, not an aftermarket afterthought, from every angle.

Bronco Widebody Kit: The Cost Breakdown

Budget a well-executed Bronco widebody build at $4,000–$12,000 all-in, and work backwards from there. The kit itself is only part of that: entry-level FRP parts start around $1,500–$3,000, established names like Liberty Walk, Rocket Bunny, and Pandem sit in the $3,000–$8,000 band, and carbon fibre or custom fabrication can reach $12,000–$20,000 before anything is fitted. The remaining $2,500–$5,000 goes on the work that makes or breaks the result — installation, body prep, gap filling, and paint.

Render your Bronco before you buy anything

No two Broncos carry a widebody the same way: paint, trim level, and wheel choice all shift how the flares read. TunedRides exists for exactly this decision — upload your own Bronco, see the widebody rendered on it, and know whether the look works before any money leaves your account.

Upload your Bronco photo, free →

Rendering a Widebody Kit on Your Bronco: Three Steps

  1. 1
    Upload a photo of your Bronco. Upload any decent photo; a three-quarter or side view suits bodywork modifications like widebody kits best. JPG or PNG, up to 10MB.
  2. 2
    Select Widebody Kit as your style. The AI works from your Bronco's own proportions, applying the style to your real bodywork rather than a placeholder model.
  3. 3
    Download your render. About half a minute later it's ready. Free renders carry a watermark; Pro ($14/mo or $69/yr) delivers 250 clean HD renders a month, great to hand an installer.

FAQ: Widebody Kit on the Bronco

How much does a widebody kit cost for a Bronco?

A widebody kit for a Ford Bronco typically costs $4,000–$12,000. The kit parts alone run $1,500–$8,000 depending on brand and material (FRP vs carbon fiber). Professional installation, body prep, gap filling, and paint typically add $2,500–$5,000. Budget for the full installed cost, not just the kit price.

Does a widebody kit hurt the resale value of a Bronco?

It narrows the buyer pool rather than simply lowering the price. A widebody Bronco appeals strongly to enthusiasts and weakly to everyone else, so it can take longer to sell and the modification rarely returns its full cost. If resale flexibility matters, factor that in before cutting fenders — the conversion is not practically reversible.

Can I see what a widebody kit looks like on my Bronco before buying?

Yes. That's exactly what TunedRides is built for. Upload a photo of your Bronco and select widebody kit as your style. You get an AI render of your car with extended fenders, wider track, and full aero in about 30 seconds. Free to try, no account required.

FRP or carbon fiber for a Bronco widebody kit?

FRP (fiberglass-reinforced plastic) is the accessible route — entry kits start around $1,500–$3,000, and the material takes paint well but needs careful prep and fitting. Carbon fiber kits and high-end fabrication run $12,000–$20,000 before installation, trading cost for weight savings and finish. For most street builds on a Bronco, a well-fitted FRP kit painted properly is the sensible choice; carbon belongs on builds where budget follows ambition.

Can I keep my stock wheels after a widebody conversion on a Bronco?

Technically yes, visually no. The extra 30–80mm of arch per side exists to cover a wider wheel and tire — on stock wheels the Bronco would sit visibly hollow inside the new flares, which reads as unfinished. Budget for wider wheels with recalculated offset as part of the build, and preview the full combination on a render before ordering either.

Handing it to your shop?

Pro gives you HD, watermark-free, shop-ready renders

A Ford Bronco widebody build runs $4,000–$12,000. Pro hands back a 4K render your shop can build straight from, no guesswork. Roughly $5.75/mo annually.

See what Pro unlocksOr try free first

Other Ford Bronco builds to try

StanceBronco Stance →SlammedBronco Slammed →JDM StyleBronco JDM Style →Drift BuildBronco Drift Build →Custom WrapBronco Custom Wrap →Color ChangeBronco Color Change →OffroadBronco Offroad →

Other cars in Widebody Kit spec

JeepGrand Cherokee Trackhawk →Chrysler300 →DodgeDurango →ChevroletCorvette C8 →DodgeCharger →ChevroletCorvette C4 →
← All Ford Bronco renders|All Widebody Kit renders →